Subsoiler Y72
The Y72 subsoiler is used to loosen and break up soil at depths below the level of a traditional plough. At that level the soil is very tough after all these years of ploughing at 30-40cm. In order to break this area, the EVAK subsoiler can be used to penetrate the soil at a depth up to 70cm. Then water and air can reach this point which is ideal for the plants roots.
Technical Characteristics
- Heavy duty frame made of square hollow section 100×100×10mm.
- Durable tine made of special cast steel designed by EVAK.
- Safety screw in case of impact in stone.
- Life time guarantee for the tine against breaking or bending.
- Easy to pull high working depth, low fuel consuption
- Double toothed roller to further break the soil's clods.
- The roller is regulated hydraulically both in height and angle between them.
- Special very strong triple clamps for connecting the tine to the frame.
Specifications
| Technical Characteristics | Subsoiler RY72 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| RDY62 180/5 |
RDY62 220/7 |
RDY62 260/9 |
RDY62 280/10 |
RDY62 360/13 |
RDY62 180/5 |
RDY62 220/7 |
RDY62 260/9 |
RDY62 280/10 |
RDY62 360,13 |
|
| Working width (m) | 2,1,80 | 2,20 | 2,60 | 2,80 | 3,60 | 1,80 | 2,20 | 2,60 | 2,80 | 3,60 |
| No. of tines | 5 | 7 | 9 | 10 | 13 | 5 | 7 | 9 | 10 | 13 |
| Working depth (cm) | 55 | |||||||||
| No. discs | - | 7 | 9 | 11 | 12 | 13 | ||||
| Weight (kg) | 380 | 530 | 730 | 760 | 970 | 860 | 960 | 1230 | 1260 | 1580 |
| Horsepower (HP) | 75 100 |
90 120 |
120 150 |
140 160 |
160 200 |
90 120 |
100 130 |
130 160 |
160 180 |
180 200 |
